BHGZK - DYNABOND SYSTEM 2 PART A

  • MSDS: BHGZK
  • Manufacturer: AMERICAN CHEMICAL CORP
  • Product Name: DYNABOND SYSTEM 2 PART A
  • National Stock Number: 8010-00N010169
Product Identification

Product ID:DYNABOND SYSTEM 2 PART A
MSDS Date:11/25/1985
FSC:8010
NIIN:00N010169
MSDS Number: BHGZK

Responsible Party
AMERICAN CHEMICAL CORP
35555 CURTIS BLVD
EASTLAKE, OH 44094

Emergency Phone: 215-943-7600

Info Phone: 215-943-7600

Preparer: JAL KHAMBATTA

Cage: 0BTX0

Contractor
AMERICAN CHEMICAL CORP
EASTLAKE, OH 44094

Telephone: 215-943-7600

Cage: 0BTX0

Ingredients

TITANIUM DIOXIDE

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 13%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293


SILICA (AMORPHOUS).ACGIH TLV IS FOR TOTAL DUST CONTAINING

CAS: 7631-86-9

RTECS: VV3100000

Fraction By Weight: 14%

OSHA PEL 80 MG/CUM TWA

ACGIH TLV: 10 MG/CUM TWA (1989)

Hazards

LD50 LC50 Mixture:N/K
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SEE SIGNS AND SYMPTOMS OF
OVEREXPOSURE.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:EYES:PRODUCT MAY BE AN EYE IRRITANT.IT MAY
CAUSE IRRITATION OF THE CONJUNCTIVAL MEMBRANES AS WELL AS MINOR
TRANSIENT CORNEAL INJURY.SKIN:MAY PRODUCE SKIN IRRITATION.PROLONGED
CONTACT MAY CAUSE SOME SW ELLING OR MILD BURNS.RASH,DRYING,OR
DEFATTING MAY RESULT FROM REPEATED CONTACT.INGESTION/INHALATION:N/K
.
Medical Cond Aggravated by Exposure:N/K

First Aid

First Aid:EYES:FLUSH THOROUGHLY WITH WATER FOR AT LEAST 15
MINUTES.SKIN:WIPE PROMPTLY WITH CLEAN DISPOSABLE CLOTH,THEN WASH
THOROUGHLY WITH SOAP AND WATER,AND SEEK MED ATTTN IF IRRITATION
FROM CONTACT PERSISTS. INGESTION:IF SWALLOWED,DO NOT INDUCE
VOMITING.SEEK IMMEDIATE MEDICAL ADVICE AND/OR
ATTENTION.INHALATION:REMOVE TO FRESH AIR.SUPPORT BREATHING (GIVE
0*2/ARTIFICIAL RESPIRATION).

Fire Fighting

Extinguishing Media:PRODUCT WILL NOT BURN UNTIL WATER EVAPORATES.THEN
USE WATER.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE.WATER BASED MATERIAL.HAZARDOUS
DECOMPOSITION PRODUCTS:CARBON MONOXIDE AND/OR CARBON DIOXIDE,AND
OXIDES OF NITROGEN.

Accidental Release

Spill Release Procedures:DIKE AND CONTAIN SPILL WITH INERT
MATERIAL.SCRAPE INTO CONTAINER FOR DISPOSAL.
Neutralizing Agent:N/K

Handling

Handling and Storage Precautions:N/K
Other Precautions:N/K

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN .
Ventilation:GENERAL MECHANICAL VENTILATION IS SUFFICIENT.
Protective Gloves:WEAR IMPERMEABLE GLOVES.
Eye Protection:CHEM WORK GOGG,FACESHLD OPTIONAL .
Other Protective Equipment:EYE WASHES AND SAFETY SHOWERS IN WORK AREAS
ARE RECOMMENDED.IMPERMEABLE APRONS ARE ADVISED WHEN WORKING W/ THIS
PRODUCT.
Work Hygienic Practices:N/K
Supplemental Safety and Health
N/K

Chemical Properties

Boiling Pt:B.P. Text:212F,100C
Melt/Freeze Pt:M.P/F.P Text:N/K
Decomp Temp:Decomp Text:N/K
Spec Gravity:>1 (WATER=1)
Evaporation Rate & Reference:1 (WATER=1)
Solubility in Water:APPRECIABLE
Appearance and Odor:THIN LIGHT BLUE LIQUID.
Percent Volatiles by Volume:30

Stability

Stability Indicator/Materials to Avoid:YES
THIS PRODUCT IS INCOMPATIBLE WITH STRONG OXIDIZING AGENTS,STRONG ACIDS
AND BASES,AND SELECTED AMINES.
Stability Condition to Avoid:N/K
Hazardous Decomposition Products:THERMAL DECOMPOSITION IN THE PRESENCE
OF AIR MAY YIELD CARBON MONOXIDE AND/OR CARBON DIOXIDE,AND OXIDES
OF NITROGEN.
Conditions to Avoid Polymerization:WILL NOT OCCUR.

Disposal

Waste Disposal Methods:DISPOSAL MUST BE IN ACCORDANCE WITH
FEDERAL,STATE AND LOCAL REGULATIONS .BURY IN LANDFILL OR INCINERATE
WHERE PERMITTED.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.